Embedded Software Boot Camp in a Box

Whether you are new to embedded software development in C or looking for ways to improve your skills, the Embedded Software Boot Camp in a Box will provide you the hands-on education you need. Exercises are based around an ARM processor board (shown below), the MicroC/OS-II real-time operating system, and the IAR Embedded Workbench compiler/debugger, all of which are included in the box.

str9121
Learn Embedded Programming on an ARM Processor

Netrino’s popular Embedded Software Boot Camp (see upcoming dates), on which this kit is based, is an intense in-person training experience that requires attendees to be able to check out of normal work and life routines for a week—sometimes also travelling a great distance. The Embedded Software Boot Camp in a Box is a way to learn the same skills at your own pace. You’ll do the same exercises and have access to the same materials, just won’t have a “drill instructor” or the clock to prod you.

Here’s how you’ll use the Embedded Software Boot Camp in a Box to learn embedded programming:

  • Read the 350 page “Field Manual” book, which contains the slides from the in-person Boot Camps, in order.
  • If you want to dig deeper, watch the video of Michael Barr‘s acclaimed “How to Prioritize RTOS Tasks and Why it Matters” lecture on DVD, or read the three books and numerous articles provided as PDFs on the USB drive.
  • As you read, you will come to slides titled “Exercise: …”. These slides mark the best points to attempt each exercise.
  • In all there are ten programming exercises: one to test your compiler/debugger/board setup; two concerning hardware interfacing in C; six concerning multithreaded programming with uC/OS-II; and one capstone project to build a scuba dive computer. These involve hardware interactions such as blinking LEDs, debouncing pushbuttons, reading A/D converters, working with programmable timer/counters, and generating audio tones via PWM signals.
  • Detailed instructions for each exercise can be found in the printed “Exercise Manual”.
  • Solutions for each of the exercises are provided on the USB drive.
  • After you finish with the included exercises, you’ll know your way around most of your ARM processor board and be ready to explore the rest of its hardware (RS-232, CAN, Ethernet, USB, etc.) on your own.

For more details or to order your kit now, browse on over to http://www.netrino.com/Boot-Camp-Box.

Leave a Reply

Your email address will not be published. Required fields are marked *